Popular AeroCarb Accessories |
Not sure which AeroCarb Accessories you need?
Use the AeroCarb Selection Wizard!
|
AeroConversions Throttle Quadrants
|
AeroConversions Throttle Quadrants, made specifically for use with the AeroConversions AeroCarb. Available for side or center mounting.
Find Out More!
AeroConversions
Throttle Quadrants
|
|
|
AeroConversions Air Filter Assembly
|
AeroConversions Air Filter Assembly may be fitted directly or remotely to the intake bell of the AeroConversions AeroCarb and uses readily-available automotive-type 4" diameter replacement filter elements. Ships with Qty 1 air filter element.
AeroConversions Air Filter
Assembly (ACV-C10-30)
$50.00
|
|
|
AeroCarb Intake Flange Adapter
|
Use the AeroCarb Intake Flange Adapter (ACV-C10-10) to bolt the AeroCarb directly to your fresh air intake box* or carb heat box**. The ACV-C10-10 Intake Flange Adapter fits directly onto the standard AeroCarb intake bell and is a 3.125" (3 1/8") square flange with four 0.1875" (3/16") mounting pilot holes spaced 2.5" on-center.
AeroCarb Intake Flange
Adapter (ACV-C10-10)
$35.00
|
|
*Caution: do not provide ram air intake to the AeroCarb as ram air velocities at different airspeeds will effect mixture.
**Carb heat is not required with the AeroCarb, however, some countries require the installation of carb heat, and some retrofit installations may be greatly simplified by retaining the carb heat box. To find out more about the AeroCarb's resistance to carb ice, view the AeroCarb Features table. |
|
AeroConversions Spigot Hose Mount and Clamps
|
Attach your AeroCarb's "S" Spigot Mount to your engine's intake manifold using the AeroConversions ACV-M01-13 Spigot Hose (2.5 inch long x 1.875 inch OD Hose) and ACV-Z01-10 Clamps (Qty 2). Only available to fit AeroCarb "S" Spigot Mount.
ACV-M01-13 Spigot Hose
and ACV-Z01-10 Clamps
$10.00
|
|
Back to AeroCarb Page
|
| |
