The 2-into-1 Stainless AeroVee Exhaust provides 2-into-1 collection on each side, using two headers and two slip-on extensions, made from 304 stainless steel. Made to exit from a small cowl opening at the bottom center of the Sonex Aircraft firewall. Customers installing the AeroVee on aircraft other than Sonex aircraft may modify or make custom slip-on pipes to fit virtually any installation. Ships with intstallation hardware and instructions.

For those who cannot utilize the 2-into-1 Stainless AeroVee Exhaust (above), AeroConversions offers laser-cut 304 stainless steel, 0.190" thick, AeroVee Exhaust Flanges for use in fabrication of custom VW exhausts.

Tired of ruining your old CHT probes every time you touch your spark plugs? Introducing AeroConversions CHT Probes for Jabiru, AeroVee and other VW-based Engines!

Unlike traditional CHT probes which are installed under spark plugs, AeroConversions CHT probes are made to be attached to cylinder heads independently. For AeroVee, or any other VW head engines, the AeroConversions CHT Probe is screwed into the cylinder head with a small self-tapping screw. For Jabiru Engines, the probes are installed under cylinder head bolts.

AeroConversions CHT Probes are sold in sets of 2 probes for $30, available in either K-Type or J-Type, depending upon your instrumentation's requirements.

VDO brand Oil Pressure Sender: 0-80 PSI/5 Bar; 10-180 Ohms; Single Station (for one gauge), Standard Ground; 1/8" NPT thread; VDO PN#360-001

VDO brand Oil Temperature Sender: 300F/150C; 10-180 Ohms; screw cap Single Station (for one gauge), Standard Ground; M14x1.5 thread; VDO PN#323-055D

AeroConversions Spinner/Crush Plate machined from solid 6061-T6 aluminum billet doubles as Crush Plate and Spinner. Great for higher RPM engines that tend to shed traditional sheet metal or fiberglass spinners. Fits AeroVee and Jabiru 2200 Prop Hub Bolt Pattern. Also availalable to fit SAE-1 prop hub bolt pattern, used on Jabiru 3300 and many other engines. Included in all Sonex Aircraft kits.

Laser-cut and anodized 0.25" thick 6061-T6 aluminum AeroVee Crush Plate fits AeroVee and Jabiru 2200 Prop Hub Bolt Pattern.

AeroConversions Air Filter Assembly may be fitted directly or remotely to the intake bell of the AeroConversions AeroCarb (AeroCarb supplied with AeroVee Engine Kit) and uses readily-available automotive-type 4" diameter replacement filter elements. Ships with Qty 1 air filter element.

AeroConversions Throttle Quadrants, made specifically for use with the AeroConversions AeroCarb (AeroCarb supplied with AeroVee Engine Kit). Available for side or center mounting.

Find Out More!